Transmission rebuild page 3

Fresh shift forks installed (pre A+ rod change 1/2 fork NLA) so here we go.

No problem everything drops in.

Still no problem everything spins.

What could look more normal?

This is how I secure the box to torque the large hardware.

Bench shifting only produces 1st., 3rd., 4th. Time to take another look.

A+ on left Pre on right, it's plain where the problem has to be.

The extended portion while machined to clear std. 2nd. gear it won't clear a JKD ultra close rolling start set.

I found proper welding rod and had the under side of the fork tigged up.

Welding provided support to machine to clear the larger 2nd gear.

 I made a boring bar for the lathe and a fixture for my tool post to machine the fork.